No products
API There are 552 products.
-
API STD 520 PT I:2014
API STD 520 PT I:2014 This standard applies to the sizing and selection of pressure-relief devices used in refineries, chemical facilities, and related industries for equipment that has a maximum allowable working pressure (MAWP) of 15 psig (103 kPag) or greater. The pressure-relief devices covered in this standard are intended to...
$143.50 $358.75 -60%In Stock -
API RP 2SM:2014
API RP 2SM:2014 This document applies to synthetic fiber ropes used in the form of taut leg or catenary moorings for both permanent and temporary offshore installations such as: a) monohull-based floating production, storage, and offloading units (FPSOs); b) monohull-based floating storage units (FSOs, FSUs); c) monohull or...
$75.85 $189.63 -60%In Stock -
API RP 17W:2014
API RP 17W:2014 This document provides subsea capping stack recommended practices for design, manufacture, and use. The document applies to the construction of new subsea capping stacks and can be used to improve existing subsea capping stacks. The document can aid in generating a basis of design (BOD) document as well as...
$52.89 $132.23 -60%In Stock -
API STD 17O:2014
API STD 17O:2014 This standard addresses the requirements for the use of high integrity pressure protection systems (HIPPS) for subsea applications. API 14C, IEC 61508, and IEC 61511 specify the requirements for onshore, topsides, and subsea safety instrumented systems (SIS) and are applicable to HIPPS, which are designed to...
$49.20 $123.00 -60%In Stock -
API MPMS 2.2G:2014
API MPMS 2.2G:2014 This standard describes measurement and calculation procedures for determining the diameters of upright cylindrical tanks by taking vertical offset measurements externally using Electro-optical Distance Ranging (EODR) equipment rather than conventional ORLM plummet/trolley equipment. This standard is an alternate...
$32.80 $82.00 -60%In Stock -
-
-
API MPMS 17.6:2014
API MPMS 17.6:2014 This document describes procedures for determining or confirming the fill condition of pipeline systems used for the transfer of liquid cargoes before and/or after the liquid is loaded onto or discharged from marine vessels. It includes descriptions of methods and procedures that apply to crude oil and petroleum...
$46.33 $115.83 -60%In Stock -
-
API 510:2014 + ADD 1:2017 + ADD 2:2014
API 510:2014 + ADD 1:2017 + ADD 2:2014 This inspection code covers the in-service inspection, repair, alteration, and rerating activities for pressure vessels and the pressure-relieving devices protecting these vessels. This inspection code applies to all hydrocarbon and chemical process vessels that have been placed in service...
$95.12 $237.80 -60%In Stock -
API STD 682:2014
API STD 682:2014 This standard specifies requirements and gives recommendations for sealing systems for centrifugal and rotary pumps used in the petroleum, natural gas, and chemical industries. See A.1.1 and A.1.2. It is the responsibility of the purchaser or seal vendor to ensure that the selected seal and auxiliaries are suitable...
$104.55 $261.38 -60%In Stock -
API RP 583:2014
API RP 583:2014 This recommended practice (RP) covers the design, maintenance, inspection, and mitigation practices to address external corrosion under insulation (CUI) and corrosion under fireproofing (CUF). The document discusses the external corrosion of carbon and low alloy steels under insulation and fireproofing and the...
$69.70 $174.25 -60%In Stock
