No products
API There are 552 products.
-
API RP 5C 5:2017
API RP 5C 5:2017 This International Standard establishes minimum design verification testing procedures and acceptance criteria for casing and tubing connections for the oil and natural gas industries. These physical tests are part of a design verification process and provide objective evidence that the connection conforms to the...
$73.80 $184.50 -60%In Stock -
API RP 5C 8:2017
API RP 5C 8:2017 This recommended practice covers the care, maintenance, and inspection of used low alloy carbon steel coiled tubing. Commonly manufactured coiled tubing outside diameters range from 25.4 mm (1.000 in.) to 88.9 mm (3.5 in.).
$36.49 $91.23 -60%In Stock -
API PUBL 4783:2016
API PUBL 4783:2016 The oil and gas industry has significant connections to the water environment. Water is beneficially used, consumed, generated, reused, recycled, and disposed of over the life cycle of an oil and gas resource. The degree and impact of these connections vary with the nature and location of the resource and the...
$31.57 $78.93 -60%In Stock -
-
API MPMS 10.2:2016
API MPMS 10.2:2016 This test method covers the determination of water in crude oil by distillation. The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is...
$20.50 $51.25 -60%In Stock -
API RP 572:2016
API RP 572:2016 This recommended practice (RP) supplements API 510 by providing pressure vessel inspectors with information that can improve skills and increase basic knowledge of inspection practices. This RP describes inspection practices for the various types of pressure vessels (e.g. drums, heat exchangers, columns, reactors,...
$97.17 $242.93 -60%In Stock -
API MPMS 17.3:2016
API MPMS 17.3:2016 This chapter recommends the water samples and volumes to be taken, the containers to be used, the care and distribution of the samples, and the analytical procedures for use in identifying the probable source(s) of free water associated with marine petroleum cargoes. This chapter includes the following: a) basic...
$49.20 $123.00 -60%In Stock -
API RP T-1:2016
API RP T-1:2016 This recommended practice is intended to serve as a guide to develop orientation materials for personnel and visitors prior to their first trip offshore. The scope and applicability of this document concludes after check-in at the offshore facility and receipt of the facility-specific orientation.
$26.65 $66.63 -60%In Stock -
API RP 574:2016
API RP 574:2016 This recommended practice (RP) supplements API 570 by providing piping inspectors with information that can improve skill and increase basic knowledge of inspection practices. This RP describes inspection practices for piping, tubing, valves (other than control valves), and fittings used in petroleum refineries and...
$86.10 $215.25 -60%In Stock -
API MPMS 8.2:2016
API MPMS 8.2:2016 This practice describes general procedures and equipment for automatically obtaining samples of liquid petroleum and petroleum products, crude oils, and intermediate products from the sample point into the primary container. This practice also provides additional specific information about sample container...
$29.93 $74.83 -60%In Stock -
API MPMS 20.2:2016
API MPMS 20.2:2016 This standard covers the application of production allocation (determination of flow quantities and rates of oil, gas, water, and other constituents) using single-phase measurement devices in combination with a two- or three-phase production separator. This standard is applicable to single-phase measurement...
$50.84 $127.10 -60%In Stock -
