Full Description

This document specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-2. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-2, but this does not limit their application¹⁾.

This document covers the following accessories, identified in accordance with ISO 6099:

AP6 rod eye spherical, female thread (see Figure 1 and Table 1);

AB5 clevis bracket, spherical eye, in angle (see Figure 2 and Table 2);

AA6-L pivot pin, spherical bearing, locking plate (see Figure 3 and Table 3);

AL6 locking plate for pivot pin (see Figure 4 and Table 4);

AP2 rod clevis, female thread (see Figure 5 and Table 5);

AP4 rod eye plain, female thread (see Figure 6 and Table 6);

AB2 eye bracket (see Figure 7 and Table 7);

AB4 clevis bracket, straight (see Figure 8 and Table 8);

AA4-S pivot pin, plain (split pins) (see Figure 9 and Table 9);

AA4-R pivot pin, plain (rings) (see Figure 10 and Table 10);

AT4 trunnion bracket (see Figure 11 and Table 11).

These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 2944.

This document only applies to the dimensional criteria of products manufactured in conformity with this document; it does not apply to their functional characteristics.

Product Details

Published: 06/01/2022 File Size: 1 file , 1.4 MB Same As: BS ISO 8133:2022 Note: This product is unavailable in Ukraine, Russia, Belarus