More info
Full Description
Scope
This guide contains instructions for conducting tests to determine the performance characteristics and machine parameters of permanent magnet (PM) machines. The tests described may be applied to motors and generators as needed, and no attempt is made to partition this guide into clauses applying to motors and clauses applying to generators. It is not intended that this guide shall cover all possible tests, or tests of a research nature, but only those general methods that may be used to obtain the performance data and machine parameters. The schedule of factory and field tests, which may be required on new equipment, is normally specified by applicable standards or by contract specifications. This guide should not be interpreted as requiring any specific test in a given transaction or implying any guarantee as to specific performance indices or operating conditions. The term specified conditions for tests as used in this guide will be considered as rated conditions unless otherwise agreed upon. Rated conditions apply usually to the quantities listed on the machine nameplate.
Purpose
Instructions for conducting tests to determine the performance characteristics of permanent magnet machines are covered in this guide. Additional tests can be required by the customers and operators to satisfy specific performance indices.
Abstract
Revision Standard - Active - Draft.This guide contains instructions for conducting tests to determine the performance characteristics of permanent magnet (PM) machines. The tests described may be applied to motors and generators, as needed, and no attempt is made to partition this guide into clauses applying to motors and clauses applying to generators. It is not intended that this guide shall cover all possible tests, or tests of a research nature, but only those general methods that may be used to obtain the performance data. The schedule of factory and field tests, which may be required on new equipment, is normally specified by applicable standards or by contract specifications. This guide should not be interpreted as requiring any specific test in a given transaction or implying any guarantee as to specific performance indices or operating conditions.
View larger