API RP 17U:2015

This recommended practice (RP) provides guidance for the performance, qualification, application, quality control, handling, and storage requirements of wet and dry thermal insulation for subsea applications in the petroleum and gas industries. This guideline also covers the inspection of the insulation, and the repair of insulation defects. For flowlines, the installation method is not defined and may be either S-lay, J-lay, or reellay. This guideline is intended to cover all three installation methods. This guideline also takes into consideration the design and structural handling of subsea trees, manifolds, pipeline end terminations (PLETs), flowline jumpers, etc. as it pertains to the placement of structure, sacrificial anodes, handling appurtenances, etc. to ensure the integrity of the insulation's construction. Annex A specifies the minimum requirements for the performance qualification testing and inspection testing requirements for wet insulation systems (insulations in direct contact with seawater). Annex B specifies the minimum requirements for the performance qualification testing and inspection testing requirements for dry insulation systems (insulations not in direct contact with seawater). This document is not intended to address either installation procedures or proprietary fabrication of any particular insulation type. Applicability This RP is applicable to the following systems and components: - flowlines and risers; - christmas tree, valve block, and piping; - manifold valves and pipework; - PLET piping; - jumpers (i.e. piping and bends); - connectors and fittings; - valves and chokes.