Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Sale!
View larger
View larger
FORD U-MJ005-8006
New product
FORD U-MJ005-8006 1995 Edition, February 1995 ALUMINIUM-PAINT, HEAT RESISTANT UP TO 250 DEGREES C
More info
Description / Abstract:
1. SCOPE
The Material defined by this Ford Manufacturing Standard is an air drying aluminium paint with medium heat resistance. This material is only used for painting equipment inside of buildings where heat resistance up to 250° C is required. It is brush applied, without primer, directly on to grease-freelrust-free surfaces. 3. 3-1 3 .2 3.3 3.1 3.5 3.6 REQW- Binder T ~p e Shall consist of hydrocarbon resin or hydrocarbon oil t o meet the required heat resistance. Weinht Solids (FL? M BI 102-01) 45% minimum Viscosity (F'LlM BI 11141) Ready for Brushing. Rate and report. Colour Approximately White Aluminium FOE 9006 or BS Aluminium. Stability As delivered and after storage for up to three months under normal temperature conditions in the original sealed container, this material shall meet all the requirements of this standard and be suitable °or the intended application. Hard settling, skinning or gelling are not allowed. Soft settling easily dispe
The Material defined by this Ford Manufacturing Standard is an air drying aluminium paint with medium heat resistance. This material is only used for painting equipment inside of buildings where heat resistance up to 250° C is required. It is brush applied, without primer, directly on to grease-freelrust-free surfaces. 3. 3-1 3 .2 3.3 3.1 3.5 3.6 REQW- Binder T ~p e Shall consist of hydrocarbon resin or hydrocarbon oil t o meet the required heat resistance. Weinht Solids (FL? M BI 102-01) 45% minimum Viscosity (F'LlM BI 11141) Ready for Brushing. Rate and report. Colour Approximately White Aluminium FOE 9006 or BS Aluminium. Stability As delivered and after storage for up to three months under normal temperature conditions in the original sealed container, this material shall meet all the requirements of this standard and be suitable °or the intended application. Hard settling, skinning or gelling are not allowed. Soft settling easily dispe