Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Sale!
View larger
View larger
FORD WSS-M1A357-A1
New product
FORD WSS-M1A357-A1 2016 Edition, July 29, 2016 STEEL, SHEET, BORON TREATED, ALUMINIZED, HIGH STRENGTH ***TO BE USED WITH FORD WSS-M99P1111-A***
More info
Description / Abstract:
The sheet metal material defined by this specification is applicable for the direct press hardening combined hot forming/die quenching) production process. The metallurgical concept conforms to cold rolled, fully killed, fine grained, boron treated steel. The steel substrate is hot dip aluminized coated (AlSi coated). Typical thickness range is 0.8 mm to 2.5 mm.
The material specification defines the properties of the sheet material as delivered to the press-shop in the soft condition before press hardening. Fully processed press hardened part requirements like mechanical properties or final coating layer structure shall meet the performance specification WSSM99P39- A1/A4
Flexibly rolled (Tailor Rolled Blank) material used for direct press hardening is covered by this specification, see paragraph 3.7 for details.
Tailor Weld Blanks may include a section made from material to WSS-M1A357-A1. The material callout section of the drawing has to show the material used for all sections and refer to the Ford Engineering Specification for TWB and additional requirements listed there.
The material specification defines the properties of the sheet material as delivered to the press-shop in the soft condition before press hardening. Fully processed press hardened part requirements like mechanical properties or final coating layer structure shall meet the performance specification WSSM99P39- A1/A4
Flexibly rolled (Tailor Rolled Blank) material used for direct press hardening is covered by this specification, see paragraph 3.7 for details.
Tailor Weld Blanks may include a section made from material to WSS-M1A357-A1. The material callout section of the drawing has to show the material used for all sections and refer to the Ford Engineering Specification for TWB and additional requirements listed there.