No products
AAMI There are 182 products.
-
ANSI Z 21.11.2a:2013
ANSI Z 21.11.2a:2013 Details test and examination criteria for unvented heaters for use with natural, manufactured and mixed gases, liquefied petroleum gases, and LP gas-air mixtures. Such heaters are limited to Maximum input ratings of 40,000 Btu per hour.
$213.20 $533.00 -60%In Stock -
ANSI Z 21.42:2013
ANSI Z 21.42:2013 Details test and examination criteria for illuminating appliances for use with natural gas, manufactured gas, mixed gas, and liquefied petroleum gases for indoor or outdoor installations.
$141.20 $353.00 -60%In Stock -
ANSI C136.46:2013
ANSI C136.46:2013 This standard applies to concrete lighting poles used in roadway and area lighting equipment and includes nomenclature, performance criteria, marking and recordkeeping requirements, and certain minimal material needs. It does not cover concrete poles manufactured with any modified concrete mix incorporating the use...
$26.80 $67.00 -60%In Stock -
ANSI C136.25:2013
ANSI C136.25:2013 This standard details the requirements for ingress protection of luminaires in roadway and area lighting equipment, installed for their intended use and specified by end user. While these requirements are suitable for most types of lighting equipment, it should not be assumed that all the listed degrees of...
$29.20 $73.00 -60%In Stock -
ANSI C136.41:2013
ANSI C136.41:2013 This standard describes methods of light level control between an external locking type photocontrol (or similar device) and a dimmable ballast or driver for street and area lighting equipment. Mechanical, electrical, and marking requirements are established for dimming, locking type photocontrols and mating...
$28.00 $70.00 -60%In Stock -
ANSI Z 21.89:2013
ANSI Z 21.89:2013 Details test and examination criteria for portable outdoor specialty gas appliances, (fryer/boiler, smoker, tabletop grill or any combination). Appliance may be connected to a fixed fuel piping system or self contained liquefied petroleum gas or propane gas supply system of a single cylinder with a maximum size of...
$187.60 $469.00 -60%In Stock -
ANSI Z 21.5.2:2013
ANSI Z 21.5.2:2013 Details test and examination criteria for Type 2 clothes dryers for use with natural, manufactured or mixed gases, liquefied petroleum gases or LP gas-air mixtures.
$180.40 $451.00 -60%In Stock -
ANSI-ASC 14.8-2013
ANSI-ASC 14.8-2013 This standard is for accessories used on individual ladders only and prescribes rules for governing the safe design, construction, and testing of accessories used in conjunction with a portable wood, metal or reinforced plastic ladder. This standard is limited to those accessories specifically defined.Devices...
$110.00 $275.00 -60%In Stock -
ANSI N14.1:2012
ANSI N14.1:2012 This standard provides criteria for packaging used for transport of uranium hexafluoride (UF6). It includes specific information on design and fabrication requirements for the procurement of new UF6 packaging for transportation of 0.2205 lb (0.1 kg) or more of UF6. This standard also defines the requirements for...
$50.00 $125.00 -60%In Stock -
CTA-803-B:2012 (R2017)
CTA-803-B:2012 (R2017) This standard defines the terms, abbreviations, and definitions used in the sales and installation of vehicle aftermarket audio and security equipment. The standard adds continuity to mobile electronics installation information, enables easier data collection, and ensures consistency of information to...
$18.40 $46.00 -60%In Stock -
CTA-2038:2012
CTA-2038:2012 CEA-2038 defines a standard method of Infrared (IR) emitter-to-eyewear signaling that provides a basis for interoperability between time-multiplexed (including stereographic and dual-mode) display systems manufactured by different manufacturers for use in the home. The method synchronizes eyewear with display refresh...
$30.00 $75.00 -60%In Stock -
CTA-708.1:2012 (R2017)
CTA-708.1:2012 (R2017) 1 Scope This standard specifies signaling to allow CTA-708 [1] caption services to be rendered with stereoscopic 3D program content. CTA-708.1 defines the syntax and semantics of the SetDepth command. SetDepth is a variable-length command1 delivered in the C3 code set2 as defined in CTA-708 [1]. Overview The...
$22.80 $57.00 -60%In Stock
